To implement the solution, you will need any of the devices with 1-Wire interface and driver authorization I-Button tag reader. The devices have difference in additional functions, for example, the MT-25 device has voice support, and in the devices of the MT X CAN series a CAN-bus scanner is implemented to conveniently search for the necessary parameters for monitoring. When you have decided on the device, you must perform the following steps:
  1. Connect the I-Button tag reader to GNSS Tracker through the 1-Wire interface;
  2. Register in the settings of the GNSS Tracker the key of each driver authorized to the vehicle;
  3. Connect power from the on-board network to the GNSS Tracker;
  4. Configure the device and the cloud monitoring service (WIALON or any other, including your own);
  5. Now you can control which driver worked on what special machinery, at what time and how many hours, keep a record of hours, fuel consumption, vehicle mileage with reference to specific drivers.